Inhoudsopgave
Advertenties
CHECkING FOR LEAkS
WARNING: No sources of ignition are permitted to be in the vicinity during the leak test. This also includes smoking. Never check for leaks with
a burning match or a naked lame, and always do this task outdoors.
1. The gas regulating knob must be in the
2. Open the gas supply at the bottle and brush a soap solution comprising 50 % liquid soap and 50 % water onto all parts that carry gas
(connection at the gas bottle / gas pressure regulator / gas hose / gas inlet / connection on the valve). You can also use a leak spray.
3. Bubbles forming in the soap solution indicate there are leaks. IMPORTANT: Do not use the barbecue before all leaks have been eliminated.
Close the gas supply at the gas bottle.
4. Eliminate the leaks by retightening the connections if possible, or else renew the defective parts.
5. Repeat steps 1 and 2.
6. Contact your specialist gas equipment retailer if the leaks cannot be eliminated.
NOTE: Carry out the CHECK FOR LEAKS each time after the the gas bottle is connected or changed, and also at the start of the barbecue
season.
EXPLANATION OF THE SYMBOLS ON THE OPERATING CONSOLE
Heat settings and lighting
Positioning of the EASY FLIP funnel
position.
: Off position
: Low power
: Medium power
: Full power
: Lighting
: Igniter
Direct position of the EASY FLIP funnel
Indirect position of the EASY FLIP funnel
17
Advertenties
Inhoudsopgave
