Inhoudsopgave
Advertenties
FAULTS
Symptom
The door does not open
easily.
The LED lighting does not
work.
Ice building up.
Note
It is normal for the cooling circuit to make gurgling or expansion noises.
If you are unable to solve the problem then contact the service centre. When you do so, state the
type, model and serial number shown on the type plate or label on the inside of the appliance.
EN 26
Possible cause
You are trying to open the appliance's door just after you
have closed the door. Then opening the door is difficult. When
you open the door, cold air escapes from the appliance and is
replaced by warm air from the surroundings. As this air cools
a slight vacuum is created that makes it more difficult to open
the door. The situation returns to normal after a few minutes,
and the door opens easily again.
LED lamp faulty.
Freezer compartment door not
closed properly.
The door seals are dirty or the
seals are damaged.
Door seals not installed
correctly.
Solution
Consult a service technician
about LED lighting that is not
working. For safety reasons,
you are not allowed to repair
LED lighting yourself.
This product contains a light
source of energy efficiency
class F.
Make sure that the door is
closed properly.
Clean the door seals. Call the
service centre if the door seals
are damaged.
When changing the direction
of rotation of the door, the
door seal must be turned
180°. Check if this is correct.
Advertenties
Hoofdstukken
Inhoudsopgave
