Inhoudsopgave
Advertenties
5 Let the fun begin
1. Fill the carbonating bottle
Rinse the carbonating bottle with cold water before you use it for the �rst time. Fill the carbonating
bottle with cold, clean water up to the marked �lling line.
2. Attach the carbonating bottle
Screw the carbonating bottle into the carbonating bottle socket. Screw counterclockwise if viewed from
above. Don't screw extremely hard - just make sure the carbonating bottle sits properly.
3. Carbonate the water
Press the button downwards �rmly until you hear a sound from the valve. The carbonation time is
2-3 seconds for each time.
NOTE:
• NEVER continuously carbonate for over 5 seconds each time. It can lead to gas wastes or personal injury.
• You can add more carbonation to the water by repeating the carbonating process.
4. Ventilate the bottle
When hearing a buzzing sound after 3 seconds, you should release the button back to horizontal position.
Please allow the button release itself. The remaining pressure in the carbonating bottle will be released
with a puff sound. Then the sparkling water is ready. You can unscrew the carbonating bottle and enjoy it
now.
A3- 4
6 Cleaning
Rinse the carbonating bottle
- Rinse the carbonating bottle before the �rst use.
- Use clean cold water, �ber brush with a mild detergent.
- Do not use solvent, strong detergent cleaner or abrasive cleaners to clean.
NOTE:
• Never wash the Philips carbonating bottles in a dishwasher.
Clean the soda maker
• DO NOT use abrasive cleaners or solvent cleansers to clean.
• Wipe the drip tray to keep it dry.
7 Guarantee & service
If you need information or if you have any problems, please visit the Philips website at www.philips.com or
contact the Philips Customer Care Center in your country.
If there is no Customer Care Center in your country, go to local Philips dealer.
A3-3
Please keep this user manual for future reference.
A3-1
EN 3
A3-2
Advertenties
Inhoudsopgave
