Download Inhoudsopgave Inhoud Print deze pagina

Remington Endurance Groomer MB4200 Handleiding pagina 5

Inhoudsopgave

Advertenties

ENGLISH
F INSTRUCTIONS FOR USE
Switch the product on by pressing the On/Off switch.
This model has a turbo mode that can be activated by pressing down the
On/Off switch for 2 seconds.
To deactivate turbo and go to the normal speed setting, press the On/Off
switch down for 2 seconds.
Always comb your beard or moustache with a fine comb before you start
trimming.
, ADJUSTABLE COMB
Attach the adjustable comb by placing the comb above the groomer so that
the back of the adjustable comb sits above the detail blade. Slide the comb
down onto the groomer body so that the comb rails slot into the recesses
found either side of the groomer body until it clicks into place.
To remove the comb make sure the comb is set at the minimum length
setting. Grasp the comb and pull firmly upwards and away from groomer,
whilst pushing upwards with your other thumb.
Select the comb length by pressing the comb length adjustment button
and pushing upwards to increase the length setting or downwards to
decrease the length on the adjustable comb. The length setting can be
seen on the length position indicator on the back of the comb.
, TO THIN AND TAPER THE BEARD/MOUSTACHE
If you are trimming for the first time start with the maximum trimming
length setting.
Turn the unit on.
Place the flat top of the adjustable comb against the skin.
Slowly slide the trimmer through the hair. Repeat from different directions
as necessary.
If hair builds up in the trimmer comb during the trimming process, switch
the unit off, pull off the comb and brush the hair off.
, CLOSER TRIMMING AND DETAIL BLADE TRIMMING
For stubble lengths, remove the adjustable comb and follow the
instructions noted above.
Using the main blade without the adjustable comb will trim hair to 1mm.
Holding the main blade perpendicular to the skin will trim hair to 0.4mm.
To achieve a shaven look ensure the hair is already trimmed down to 1mm.
Then using the detail blade slowly rest the blades against the skin to trim
down to 0.2mm.
5

Advertenties

Inhoudsopgave
loading

Inhoudsopgave