Inhoudsopgave
Advertenties
check the humidity of your cooler. These are available from most supermarkets and hardware
shops. Place the thermometer and hygrometer on the middle shelf of the electric cooler, where it
can be read easily.
Leave overnight, compare the temperature of the thermometer and the display in the wine cooler.
The humidity in the cooler should be between 50%-80% RH depending on the type of wine.
NOTE:
● When the power is connected, cooling system starts to work. The temperature is set on certain
position, which means that if the temperature of appliance reach the point set, Self-control
Temperature System stops cooling system so the temperature in the cabinet rises gradually.
● When the inside temperature rises above the set point, Cooling Self-control Temperature starts
to work again, the cooler enter into cooling circles.
● After you setting the temperature, the display will return to show the temperature in the cooler,
but it could turn to the point that you have set gradually.
BREAKDOWNS AND SOLUTIONS
Some malfunctions can be easily resolved. Before calling customer service or a repairer, please
consult the following table:
PROBLEM
The appliance does
not work.
The appliance is not
cold enough
The device operates
continuously
The
light
doesn't
work.
Vibrations.
POSSIBLE CAUSES & SOLUTIONS
Not connected.
The circuit-breaker is tripped or the fuse is damaged.
Check if the outlet is powered by connecting another electrical device.
Check the temperature setting.
High ambient temperature may require setting the appliance to a colder
temperature.
The door is being opened too often.
The door is not completely closed.
The door seal is not properly positioned.
Not enough space around the wine cellar to allow ventilation.
The room temperature is higher than the maximum supported.
A large number of bottles inside the appliance.
The door is being opened too often.
The door is not completely closed.
Temperature control is not calibrated correctly.
The door seal is not properly positioned.
The appliance is not plugged in.
The circuit-breaker has been tripped or a fuse is damaged.
The LED lighting is out of order.
The light button is set to "OFF".
Check to make sure the appliance is level.
15
Advertenties
Inhoudsopgave
