Inhoudsopgave
Advertenties
Safety Instructions
Read and follow the instructions. The non-respect of the instructions cancels the guarantee in the event of
problems.
• Only use the pipe cutter to cut PE-HD pipes.
• Do never cut the extremity of a pipe, the lower vee has to lean against the pipe.
• Assembly problems may occur in case of an inappropriate pipe cutter position. The cutting angle α ie.
the angle between the pipe cutter blade and the plan perpendicular to the pipe axle, has to be lower
than 3° (s. Fig. B-2).
• Never place the pipe cutter at the extremity of a pipe. The pipe cutter would deform the pipe and the
blade would be bent during the cutting.
• Do not cut welding with a pipe cutter.
• Do never exceed the capacity of the pipe cutter.
Caution: Always wear gloves during the operation of the pipe cutter, to avoid serious
injuries.
Overview
1
Lock
2
Handle
3
Upper body
4
Lubricator
Technical Data
Art. no:
Ø mm
1500000789
125
1500000790
225
1500000792
315
Operating
The pipe cutter can be used in trenches. Ensure that the trench is sufficiently wide to be able to close your
pipe cutter without any problems.
Caution: Only use the pipe cutter to cut PE-HD pipes. Always place the pipe cutter blade
perpendicular to the pipe.
Î Raise the blade (6) by turning the handle (2) in the anti-clockwise direction.
Î Open the lock (1) in order to release the lower body (7).
Î Open the lower body (7).
Î Place the pipe cutter on the pipe (s. Fig B-1).
Î Close the lower body onto the pipe.
Î Release the lock (1).
Î Check whether the pipe cutter is perpendicular to the pipe to be cut (s. Fig B-1).
Î Lower the blade (6) by turning the handle (2). This operation cuts the pipe.
4
All manuals and user guides at all-guides.com
5
6
7
8
Real capacity
Max. thickness
mm
mm
125
11,4
225
323,8
ENGLISH
Blade holder
Blade
Lower body
Screw
Weight
kg
7,45
18
17,6
18
34,0
A
Dimensions
L x W x H mm
530 x 310 x 110
770 x 480 x 180
1040 x 730 x 250
B
Advertenties
Inhoudsopgave
