Pulse function
•
Press and hold the pulse function
button (B) to blend in short intervals.
The appliance stops once you release
the button.
After blending
•
Always switch off the appliance
and wait until the blade unit has
stopped completely before taking the
measuring cup or lid off the blender
jug and filling it with food.
•
Wait until the blade unit has stopped
completely before lifting the blender
jug off the motor unit, as the drive
may be damaged otherwise.
•
If the motor overheats and stops
running, unplug the appliance and
allow it cool down for 30 minutes
before using it again.
UK
CLEANING
•
Unless clearly specified in the
cleaning instructions below, please
note that none of the parts of this
appliance are dishwasher safe.
•
Always clean the appliance
immediately after use.
•
Fill the blender jug with 800 ml of
water and a few drops of washing-up
liquid. Place the lid and measuring
cup on the blender jug and place the
jug on the motor unit.
•
Switch on the appliance at the
lowest speed and allow it to run for
30 seconds. Rinse the blender jug
under running water. Dry the parts
thoroughly. Repeat if necessary.
•
Any residues stuck in the blender jug
can be removed with a washing-up
brush or wooden spatula. Never use
metal utensils!
•
Take care not to touch the blades at
the base of the blender jug during
cleaning!
•
Clean the motor unit by wiping it with
a damp cloth. A little washing-up
liquid can be added if the appliance
is heavily soiled. Do not immerse the
motor unit of the appliance in water
and make sure no water gets into the
motor unit.
•
The lid and measuring jug can be
cleaned in ordinary washing-up water.
Both parts must be completely dry
before replacing them.
•
Ensure the appliance is clean and dry
before storage.
•
Never use abrasive detergents or
solvents.
43