Inhoudsopgave
Advertenties
PREPARATION
1. Place the motor unit (5) on a flat
surface and make sure it is standing
firmly.
2. Place the blender jug (3) on the motor
unit.
3. Attach the lid (2) to the blender jug (3)
and make sure it is lying completely
flat against the edge of the blender
jug.
4. Place the measuring cup (1) in the
hole in the lid (2) and turn it to lock it
in place.
UK
A
B
C
D
USE
1. Lift the lid off the blender jug (may be
a bit tight).
2. Pour food into the blender jug. First
put in the solid ingredients, followed
by the liquid ingredients. Solid food
such as fruit and vegetables must be
cut into squares no bigger than 20×20
mm. Check that the blender jug is not
filled above the maximum mark.
3. Place the lid on the blender jug and
press it firmly so that the safety switch
engages. Check that the measuring
cup is correctly positioned in the lid.
Remove the measuring cup if you
want to use the plunger (8) to press
down solid food close to the blade
unit. The plunger must never be used
when blending hot liquid ingredients.
4. Plug in. The display lights up and a
signal sounds for 1 second. The on/
off button lights up red.
5. Then continue with one of the
following procedures.
41
Advertenties
Inhoudsopgave
