Inhoudsopgave
Advertenties
ENGLISH
low speed until it switches off.
2.
If the selected speed is medium, the fan will operate at this speed for 30 minutes. After
this time, it will operate at low speed until it switches off.
If the selected speed is low, the fan will operate at this speed until it switches off.
3.
NOTE: if no operation is performed for 30 seconds, the fan display will turn off. Press any of the
icons to turn it on again.
The fan can be operated in
mode, which means that it will operate automatically.
1.
Set the timer so that the fan switches off after 3 hours and activates the oscillation
function. The fan will operate at high speed for 15 minutes. After this time, it will operate
at medium speed for 15 more minutes. Then, it will operate at low speed until it switches
off. You can deactivate the oscillation function manually if you wish.
NOTE: if no operation is performed for 30 seconds, the fan display will turn off. Press any of the
icons to turn it on again.
The fan has a timer
which allows you to set the operation time from 1 to 12 hours. If
2.
no operation is performed for 30 seconds, the fan display will turn off. Press any of the
icons to turn it on again.
Press the
icon to activate and deactivate the oscillation function. If you activate it, the
3.
corresponding indicator light will appear on the display.
4.
The display can be temporarily switched off by pressing the
control or by pressing and holding the
display will turn on again when you press any icon.
Remote control
Fig. 6.
-
The remote control requires 1 x CR2032 battery (included). You can store the remote
control at the back of the fan. It has a compartment for it in the upper part.
-
The functions of the remote control are the same as those of the control panel.
1
Power button
2
Speed button: 3 speeds are available.
40
ENERGYSILENCE 9150 SKYLINE SMART DESIGN
button on the remote
icon on the control panel for 3 seconds. The
3
Oscillation button
4
LED display light button
5
Timer button: the timer can be set in a range of 1-12 hours.
6
Modes button: Normal, Natural and Sleep. Press this button to select one
of the three modes.
5. CLEANING AND MAINTENANCE
NOTE: repairs should only be carried out by qualified personnel. Contact the official Cecotec
Technical Support Service.
-
Always disconnect electrical and electronic appliances before cleaning them.
-
Use a soft, damp cloth to clean the surface of the device.
-
To remove stubborn dirt, you can wipe it off with a cloth dampened with warm, soapy
water. Do not use solvents, as they may damage the plastic housing.
-
Do not use abrasive or corrosive products.
-
Do not immerse any part of the fan in water or other liquids.
-
After cleaning, carefully dry the appliance and make sure that all the electrical parts are
completely dry.
-
Make sure the air inlet and outlet are kept clean and protected from dust and dirt.
-
If the product is not going to be used for a long period, unplug it, and store it in a dry and
safe place.
6. TECHNICAL SPECIFICATIONS
Product reference: 08363
Product: EnergySilence 9150 Skyline Smart Design tower fan
Power: 45 W
Voltage: 220 - 240 V~
Frequency: 50-60 Hz
ENGLISH
ENERGYSILENCE 9150 SKYLINE SMART DESIGN
41
Advertenties
Inhoudsopgave
