Inhoudsopgave
Advertenties
ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1.
Control panel
2.
LED display
3.
Base
Storage space for remote control
4.
5.
Cord winder
Control panel
Fig. 2
1.
Modes icon
2.
Timer icon
3.
Power icon
Speed icon
4.
5.
Oscillation icon
6.
Auto mode indicator light
7.
Sleep mode indicator light
Natural mode indicator light
8.
9.
Speed indicator light
10. Oscillation indicator light
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
-
This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
38
ENERGYSILENCE 9150 SKYLINE SMART DESIGN
Box content
-
Tower fan
-
Remote control
-
CR2032 battery
-
Instruction manual
3. PRODUCT ASSEMBLY
Remove the two halves of the base from the packaging. Then, fit the halves together as
1.
shown in figure 3.
2.
Pass the power cable through the central hole and place the base on the fan. Secure it
tightly with the four screws provided, as shown in figure 4.
Cord winder: remove the cord winder from the packaging and place it on the back of the
3.
fan. You can hang the cable from this part when you are not using the appliance as shown
in figure 5.
4. OPERATION
NOTE:
You can control the fan by using the control panel on the top of the fan or by using the remote
control.
1.
Place the appliance on a flat, stable surface. Next, plug the cable into the mains socket.
2.
To switch the fan on, press the
icon. Press this icon again to switch it off.
3.
The
icon is used to set the fan speed (low, medium, or high). The selected speed will
appear on the display.
4.
Press the
icon to set the mode. This fan has three modes: Normal, Natural, or Sleep.
Normal mode
The fan will operate at the previously selected speed.
Natural mode
The operating sequence in this mode is as follows: low speed (5 seconds) → medium speed
(5 seconds) → high speed (5 seconds) → medium speed (5 seconds). Then, the sequence will
start again.
Sleep mode
1.
If the selected speed is high, the fan will operate at this speed for 30 minutes. Next, it will
operate at medium speed for another 30 minutes. After this time, the fan will operate at
ENGLISH
ENERGYSILENCE 9150 SKYLINE SMART DESIGN
39
Advertenties
Inhoudsopgave
