Advertenties
Settings
Image
Note
You can also start the patrol directly in the live im-
age of the respective network camera.
Select the camera channel to be processed at "Camera".
Adapt the camera image to light conditions at "Mode" by
means of specified settings or with user-defined settings.
PTZ
Note
Here you can set up presets and patrols for the
TVIP2xxxx network cameras.
Saving and retrieving presets
All manuals and user guides at all-guides.com
Setting up and calling up patrols
Motion
Select the camera channel under "Camera".
Select the checkbox for motion detection.
The motion detection in the network camera must also be
activated. For further details, refer to the network camera
manual.
Handling
Trigger Channel
1. Use the arrow buttons to move the network cam-
era to the required image section and save the
position, for example as Preset 1
2. Click on Call up to move to Preset 1.
1. Create several presets to use for the patrol
2. Click on + to select a preset
3. Add more presets to set up the required patrol.
on the play symbol to start the patrol.
4. Then click
Note
In order to record using the motion recognition, you
must set the time plan at recording (see p. 109).
106
Advertenties
