Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2.
Insert legs in relevant holes in the base of the main part of the crib, pressing
the lock key at the same time (fig. 3). If you can hear a click, it means that
legs have been properly installed (fig. 4, 5).
3.
Snap covering fasteners (fig. 6).
4.
Put the mattress into the crib (fig. 7).
5.
To adjust the inclination of the mattress, fasten the buckle on the adjustment
strap and adjust to obtain the desired height.
When taken out of the packaging, the mattress may be curved. It is natural due to
packing method. To straighten it, bend the mattress in the opposite direction (fig. 18).
Cradle function
1.
To lock the cradle function, pull out the lock lever in the base of the main
part of the crib (fig. 8).
2.
To unlock the cradle function, press the lock lever (fig. 9). Now the crib can
swing to the left and right rhythmically.
How to fold the crib
1.
Take the mattress out of the crib (fig. 7).
2.
Press folding keys on both sides of the crib and lower plastic protection (fig. 10).
3.
Gently press the crib frame on both sides (fig. 11).
4.
Remove legs by pressing the lock key (fig. 12). The crib is now folded (fig. 13).
How to remove the covering
To remove the crib covering, undo fasteners (fig. 6) and zip (fig. 14). Remove
the covering as showed in fig. 15.
Sunshade and mosquito net – applies to MALIN EVO
1.
To install the sunshade, catch plastic holders on the frame and snap the
fastener in the crib covering (fig. 16).
2.
Plastic handles of the sunshade must be put on a specially designated slot
on the frame (fig. 17).
3.
You can put the mosquito net on the sunshade with a zip.
Wheel lock
To lock the wheels, press the locking button located at each wheel (fig. 19).
EN
‑ 8 ‑
Advertenties
Inhoudsopgave
