Inhoudsopgave
Advertenties
Completely read through the operating instructions,
the „Warranty and Additional Information" booklet as
!
well as the latest information under the internet link
at the end of these instructions. Follow the instructions
they contain.These documents must be kept in a safe
place and passed on together with the product.
Intended use
This line laser projects four red laser lines and is designed for
laying wall and floor tiles. The attached lay edges and contact
surface make it possible to position floor tiles. Integral vials
assist in adjusting the line laser, which can also be used as a
spirit level.
General safety instructions
– The device must only be used in accordance with its
intendedpurpose and within the scope of the specifications.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– Modifications or changes to the device are not permitted, this
will otherwise invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its
functions fail or the battery charge is weak.
Safety instructions
Using class 2 lasers
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they
should shut their eyes and immediately move away from the beam.
– Under no circumstances should optical instruments
(magnifying glass, microscope, binoculars) be used to look
at the laser beam or reflections.
06
EN
Laser radiation! Do not stare into the beam!
Class 2 laser · < 1 mW · 635 nm
EC 60825-1:2014, EN 60825-1:2014/A11:2021
EN 50689-1:2021
Advertenties
Inhoudsopgave
