Inhoudsopgave
Advertenties
Step 2
•
Take the 2 wheel suspensions and connect them to the axle as shown
•
Bolt the ends of the connecting tube with the left and right suspension with M6X40
bolts and M6 nut
•
Connect connecting tube with the shaft carrier plate
•
Connect attached support leg with wheel suspension and funnel with M6X70 bolts, M6
nut, and 6 mm washer
Remark: The screws should not be tightened; just pre -assemble for the time
being!
Manual_FX-GS36_Int24_rev8
26
Advertenties
Inhoudsopgave
