Download Inhoudsopgave Inhoud Print deze pagina

Intended Use; Preparation And Security - FUXTEC FX-GS36 Gebruiksaanwijzing

Inhoudsopgave

Advertenties

13. Intended use

The spreader is to be used exclusively for spreading granules.
If your spreader does not distribute the granules evenly, make sure that the front of the
gearbox points to the front of the spreader. The impeller must turn clockwise. Reversing the
gear will cause the impeller to rotate counterclockwise. Clean the paddlewheel after each use.
Residues on the bucket wheel cause uneven distribution.
Your spreader is designed to give the best spreading results when pushed at 5 km/h (fast
walking). Slower or faster speeds will change your spreading pattern. Moist grit or granulate
changes the flow velocity and thus also the spreading pattern. Clean your spreader thoroughly
after each use. Gears are already lubricated at the factory

14. Preparation and security

Wear face protection or safety goggles during use
Wear appropriate clothing. Only wear closed shoes with non-slip soles. Use of the
granulate spreader with sandals or barefoot is prohibited
Wear close-fitting clothing. Avoid too loose clothing
Wear non-slip gloves during use
If necessary, wear a dust mask, starting from the material to be scattered
Long hair should be bound back
Apply directional markings before using the granulate spreader
Use only in daylight or good artificial light
Read and follow all instructions of the chemical manufacturer
ATTENTION
During work, the line of sight must be directed to the surface to be processed; do not
be distracted
Ensure a secure stand and direction of movement. Caution on unpaved or slippery
surfaces
Attention: Chemicals or materials that are hazardous to the environment should be
avoided
Follow all guidelines of the chemical manufacturer
Manual_FX-GS36_Int24_rev8
22

Advertenties

Inhoudsopgave
loading

Gerelateerde Producten voor FUXTEC FX-GS36

Inhoudsopgave