Inhoudsopgave
Advertenties
Lower the capsule loading lever to close the pod
fitting compartment.
Press and hold one of the three coffee delivery
/
/
for at least 5 seconds. The selected
button will flash and the coffee machine will enter
the programming mode. Now release the key.
PREPARING THE COFFEE
During programming, the display shows the ani-
mation of the selected beverage.
Once the desired coffee amount is reached, stop
the brewing by pressing the button again.
If the programmed measure exceeds the maximum
allowed (240 ml) the machine will automatically stop
delivery, the delivery button will blink and the last
programmed measure will be saved in the memory.
If there is a power failure during programming, the
last programmed value remains in the memory.
If during a dose programming, water lack is indicated,
the machine stops the supply and the dose being pro-
grammed won't be saved. Once filled the water tank,
repeat the dose programming procedure.
For a new supply cycle, wait for supply buttons
and multifunction button turning on with steady
white light.
Once supply is over, lift and then lower the capsule
loading lever to unload the exhausted capsule.
EN
43
Advertenties
Inhoudsopgave
