Inhoudsopgave
Advertenties
INSTRUCTIONS FOR USE
Original documentation drawn up in italian.
For Your Safety
Before using this machinery, please carefully read the instruction manual and strictly follow its instructions.
Before each operating cycle, make sure that the machinery is in good condition. The
machinery should not be used if the conditions are not safe enough or if any failure has been reported.
– Do not use the jack beyond its nominal capacity.
– This tool is designed for lifting purposes only.
– Use on surfaces which can provide adequate resistance.
– Immediately support the load with suitable stands (Beta item 3010).
– Put the jack on such surface as recommended by the manufacturer of the machine to lift.
– Use only extensions or connections recommended for the machine to lift by the manufacturer.
– The jack should be operated in a vertical position.
– Do not make any structural change to the jack.
– Do not remove, cover or damage the safety labels; replace them if they are damaged.
– This booklet is an integral part of the jack, and should always be made available to the operator; arrange for a few
preventive copies to be prepared.
– Use only original spare parts.
– Before using the jack, make sure that it is in good condition. Do not use it if you are not sure or are aware of any damage.
– Misusing the jack may result in serious damage to the equipment and injury to people.
Specifications
Item
Maximum load
Minimum height
Working height
Adjustment height
Maximum height
Weight
Operating Tips
Lifting machinery:
1. Make sure that the jack and the machinery have been placed on a suitable surface.
2. If the machinery is fitted with castors, apply the parking brake or lock the castors.
3. To place the jack correctly, consult the instruction manual of the machinery.
4. Do not overscrew the release valve.
5. Place the operating lever and pump to lift the machinery.
6. Immediately place some stands to support the machinery. Do not work under the machinery if it has been lifted without placing
any stands. The jack is designed to lift the weight; it does not guarantee static maintenance.
7. Slowly unscrew the release valve, to control down speed, until contact is made with the stands. Lowering machinery
1. Do not overscrew the release valve.
2. Pump to lift the machinery, until it is pulled away from the stands.
3. Remove the stands.
4. Slowly unscrew the release valve, to control down speed, until contact is made between the machinery and the ground.
Checks
The product should be stored with the instruction booklet.
Before using the product, visually check it; do not use it if it has been damaged or deformed, or if any parts are
missing.
Oil level:
1. Unscrew the release valve and lower the cylinder completely.
2. Remove the inspection cap.
3. Fill to cap level with new oil AWS 68; do not overfill.
4. Place the cap back.
5. Lift and lower once to perform a load-free test.
ART. 3011 Hydraulic Bottle Jack
3011T 2
3011 T3.5
2 T
3.5 T
174 mm
170 mm
115 mm
110 mm
90 mm
86 mm
369 mm
366 mm
3.5 Kg
3.5 Kg
3011 T5
3011 T10
5 T
10 T
203 mm
220 mm
146 mm
150 mm
118 mm
114 mm
467 mm
484 mm
4.5 Kg
7 Kg
4
EN
3011 T15
3011 T20
15 T
20 T
230 mm
241 mm
154 mm
165 mm
113 mm
115 mm
497 mm
521 mm
9 Kg
13,5 Kg
Advertenties
Inhoudsopgave
