Advertenties
en Troubleshooting
Fault
Appliance is not dis-
pensing milk froth.
No milk intake by the
milk system.
Milk froth is too cold.
Cold-brewed bever-
age is not cold
enough.
Appliance is not dis-
pensing hot water.
Appliance is not dis-
pensing drinks.
There is dripping wa-
ter on the inner floor
of the appliance.
There is brown water
under the coffee
grounds container or
the drip tray.
64
Cause and troubleshooting
▶
Descale the appliance.
The milk system is assembled incorrectly.
▶
Assemble the milk system correctly.
Milk tube not immersed in milk.
▶
Use more milk.
▶
Check whether the milk tube is immersed in the
milk.
Milk is too cold.
Use lukewarm milk.
▶
Water in water tank is warm.
Fill the water tank with fresh, cold, non-carbonated
1.
drinking water.
You can add ice cubes to cool the beverage down
2.
even more.
Beverage dispenser is soiled.
Clean the beverage dispenser in the dishwasher.
▶
Air is in the water filter.
Immerse the water filter in water with the opening
1.
facing upwards until no more air bubbles escape.
Reinsert the filter.
2.
▶
Firmly press the water filter straight down into the
tank connection.
Residues of limescale remover are blocking the water
tank.
Remove the water tank.
1.
Clean the water tank thoroughly.
2.
Drip tray was removed too soon.
Wait a few seconds after the last drink was dis-
▶
pensed before removing the drip tray.
Coffee grounds on the invisible side of the drip edge
causes water to run under the coffee grounds con-
tainer or the drip tray.
Remove the drip tray and the coffee grounds con-
1.
tainer.
Remove the brewing unit cover.
2.
Remove the coffee grounds on the drip edge.
3.
29
→ Fig.
Advertenties
