Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2. How to clean the dust cup filter:
1) First remove the dust cup from the main unit and empty it.
2) Remove HEPf filter (f), sponge (B), pre-filter (C) and mesh filter (D) in sequence, and wash them under
running water. Then air dry completely before placing them back in the dust cup. AIR DRY ONLY.
Note:
(1) Clean the dust cup filter every two weeks or so (depending on usage).
(2) To ensure peak performance of the appliance, if the HEPf filter cannot be well cleaned or the suction of the
appliance is decreasing, it is the time to replace the HEPf filter.
3. How to clean the brush roller
1)
First turn off power and disconnect the floor brush from the appliance.
2)
Push the lock (F) outwards to unlock the brush roller from the floor brush. Take it out and remove any dirt
(hair and other fibers) tangled around the roller.
3)
Wash the brush roller as needed, using only water. fir-dry completely for at least 24 hours before reinstalling.
4)
Reinstall the brush roller and push the lock (F) back in position.
TROUBLESHOOTING
To reduce the risk of shock and unintended operation, turn off power and remove battery pack before servicing.
Problem
Not pick up debris
Brush roller not spin
Poor suction
Suddenly turns off on its
own
Appliance won't turn on
or charge
Possible cause
Dust cup is full
Filters clogged or dirty
Filters are out of service
Brush roller clogged by hair, fibers, etc.
Filters clogged or dirty
Dust cup not installed correctly
Low battery
Nozzle or dirt passage clogged
Dust cup is full
Filters clogged or dirty
Overheat
Low battery
Overheat
Possible solution
Empty the dust cup
Clean the filters
Change the worn filters
Clean the brush roller
Clean the filters
Reinstall the dust cup
Fully charge the battery
Disconnect nozzle to remove
decries
Empty the dust cup
Clean the filters
Let appliance cool down and retry
Fully charge the battery
Let appliance cool down and retry
- 18 -
Advertenties
Inhoudsopgave
