Getting Started; Before Connecting The Monitor; Setting The Display Resolution; Mounting The Stand - Medion ERAZER Spectator X50 Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor ERAZER Spectator X50:
- Handleiding (40 pagina's) ,
- Gebruiksaanwijzing (15 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
WARNING!
Risk of hearing damage!
Using headphones/earphones to listen to a
device at high volumes for an extended peri-
od can damage your hearing.
Before pressing play, set the volume to
the lowest setting.
Start playback and increase the volume to
a comfortable level.
7. Gett ing started
7.1. Before connecting the monitor
It is possible that your existing monitor supports a physi-
cal resolution that is not supported by your new monitor.
In this case, the image on your new monitor may not ap-
pear correctly once it has been connected.
To prevent this, select a physical resolution that is
supported by both monitors and, if necessary, set this
physical resolution in your operating system before
connecting the new monitor.
7.2. Sett ing the display resolution
The monitor supports the physical resolutions listed in the
table. The aspect ratio of the display screen is 16:9. You will
get an image that is free from distortion by selecting the
2,560 x 1,440 pixels resolution. This is a native 16:9 aspect
ratio. Image distortions or black bars at the end of the pic-
ture can occur with all other resolutions.
Set the physical resolution on your computer accord-
ing to the instructions in your operating system.
Vertical
Physical
frequency (Hz)
resolution
(pixels)
HDMI
800 x 600
56-144
1024 x 600
60-144
1024 x 768
60-144
1152 x 648
60-144
1280 x 720
50-144
1280 x 768
60-144
1280 x 1024
60-144
1400 x 1050
60-144
1440 x 900
60-144
1600 x 900
60-144
1600 x 1200
60-144
1680 x 1050
60-144
1776 x 1000
60-144
1920 x 1080
50-144
1920 x 1200
60-144
2560 x 1440
60-144
7.3. Mounting the stand
Attach the monitor stand as shown in the illustration. Car-
ry out this step before connecting the monitor.
Vertical
frequency (Hz)
7.4. Setup
DPI
56-165
Avoid glare, reflections and extreme dark-light contrasts
60-165
to protect your eyes.
60-165
The monitor should never be placed close to windows,
60-165
because this is where the workspace is illuminated the
60-165
brightest by daylight. This brightness makes it more diffi-
cult for the eyes to adjust to the darker screen.
60-165
Always position the monitor with the line of sight parallel
60-165
to the window front.
60-165
The parallel line of sight must also be maintained with re-
gards to artificial lighting equipment. In other words, the
60-165
same criteria and reasoning apply when the workspace is
60-165
illuminated with artificial light.
If it is not possible to position the monitor as described,
60-165
the following measures may be helpful:
60-165
• turn, lower or angle the display screen
60-165
• slats or vertical net curtains on the windows
60-165
• partition walls or changes to the lighting equipment.
60-165
60-165
1
2
3
Fig. 2 – Mounting the stand
DE
FR
NL
ES
IT
EN
9
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
