Inhoudsopgave
Advertenties
5.4 Setting the alarm
• Repeatedly press the MODE button (3) to enter alarm mode.
• Press and hold the MODE button (3) for about four seconds to start setting the alarm.
• Hours
• Minutes
• Press the UP (6) or DOWN (7) buttons to select the individual values.
• Press the MODE button (3) to adopt the set value displayed and skip to the next item.
• Press the MODE button (3) to save the settings and return to the normal display.
5.5 Temperature measurements, maximum/minimum display
• Press the DOWN button (7) when in any mode to choose between °C (Celsius) and °F
(Fahrenheit).
• Press the MAX/MIN button (4) to display the maximum or minimum recorded values for
temperature and humidity.
5.6 Alarm
• In time or calendar mode, press the UP button (6) to switch the alarms on or off. If one
of these symbols appears on the display, the relevant functions are activated.
• If the alarm is switched on, it will stop going off automatically after about 2 minute or
when the SNZ (5) or LIGHT (8) button is pressed. If you press the SNZ button (5), the
alarm will go off again four times.
5.7 Temperature trend display (2)
This display shows the temperature trend over the last 12, 6, 3, 2 or 1 hour(s), within a max.
range of +/- 3 °C or +/- 5.4 °F. It is only for informational purposes; you cannot make any
settings on this display.
6. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive
cleaning agents. Make sure that water does not get into the product.
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting
from improper installation/mounting, improper use of the product or from failure to observe
the operating instructions and/or safety notes.
8. Technical Data
Power supply
Measuring range
Temperature
Measuring range
Humidity
4
3,0V
2 x AAA
0 °C - +50 °C
30% - 85%
Advertenties
Inhoudsopgave
