Inhoudsopgave
Advertenties
Warning – Batteries
• Do not burn batteries or heat them up.
• Never open, damage or swallow batteries or allow them to enter the environment.
They can contain toxic, environmentally harmful heavy metals.
• Remove spent batteries from the product and dispose of them without delay.
• Avoid storing, charging and using in extreme temperatures and at
extremely low atmospheric pressures (such as at high altitudes).
• Ensure that batteries with damaged housings do not come into
contact with water.
• Keep batteries out of the reach of children.
4. Getting Started
Inserting the battery
• Open the battery compartment (9), insert the battery/batteries, ensuring that
the batteries are inserted correctly in terms of polarity, and then close the battery
compartment (9). The thermometer is now ready for use.
Replacing the batteries
• If the display (1) becomes dimmer, you must replace the battery.
• When inserting the batteries, ensure that the polarity is correct.
5. Operation
• Press the MODE button (3) to switch between the three display modes available. The
modes are as follows (in that order): clock, calendar, alarm.
Note
• The product is usually in clock mode. If the product is in another mode, press the
MODE button (3) until it is in the mode you want.
• When you adjust the settings, the selected item will ash to indicate that it can be set.
5.1 Setting the time format/time
• In clock mode, press and hold the MODE button (3) for about 4 seconds to start setting
the time:
• Hours
• Minutes
• Press the UP (6) or DOWN (7) buttons to select the individual values.
• Press the MODE button (3) to adopt the set value displayed and skip to the next item.
• Press the MODE button (3) to save the settings and return to the normal display.
5.2 Setting the calendar
• In calendar mode, press and hold the MODE button (3) for about 4 seconds to start
setting the calendar:
• Year
• Month
• Day
• Press the UP (6) or DOWN (7) buttons to select the individual values.
• Press the MODE button (3) to adopt the set value displayed and skip to the next item.
• Press the MODE button (3) to save the settings and return to the normal display.
Note
• The weekday is set automatically when setting the date manually.
• If you do not make an entry for several minutes, you automatically exit the setup
mode. The settings that were made up to that point are not saved!
5.3 Switching between the 12/24-hour display formats
Press and hold the UP button (6) for about four seconds to switch between 12-hour and
24-hour time formats.
Advertenties
Inhoudsopgave
