Inhoudsopgave
Advertenties
www.domo-elektro.be
3.
Select the desired temperature with the temperature dial, according to the kind
of fabric that needs to be ironed. The temperature indicator will light up and the
iron will start heating up.
4. When the temperature indicator goes out, the selected temperature has been
reached. You can now start ironing.
Caution: Never touch the hot soleplate!
Steam ironing
Caution: do not plug in the appliance yet at this point.
1.
Grab the water tank of the steam generator by the handle and pull the trigger
on the inside of the handle to pull the water tank out of the generator. Open the
filling cap and fill the water tank with a combination of 50% tap water and 50%
distilled or purified water. Make sure that you do not exceed the maximum level
(1.2 L). Close the filling cap after filling the water tank.
2. Place the water tank back into the steam generator.
3.
Place the iron on the thermal insulation pads of the steam generator.
4. Plug in the generator, press the on/off button and the light indicator of the
lowest steam level (default) will start blinking. Set the temperature dial to the
desired temperature, according to the kind of fabric, and the temperature
indicator will light up.
5. The water in the water tank will start heating up and after a couple of minutes
the temperature indicator will go out. This
indicates that the soleplate has reached the set
temperature. When the steam level indicator stops
blinking and stays lit up, you can start ironing with
steam by pressing the steam release button.
Attention: make sure that the temperature dial is
positioned into the steam area (indicated by ).
6. You can choose your desired steam level - low
(left), medium (middle) or high (right) - by using the arrows on the control panel.
Make sure that there is enough water in the water tank.
Caution:
•
Never touch the hot soleplate!
•
Never aim the steam at people!
7.
After ironing, press and hold the on/off button. The appliance will shut off
and all the light indicators will go out. Unplug the appliance. Place the iron on
the thermal insulation pads of the generator and let the appliance cool down
completely.
47
DO7088S
Advertenties
Inhoudsopgave
