Inhoudsopgave
Advertenties
DO7088S
Descaling cartridge indicator
This light indicator will light up when the descaling cartridge needs to be replaced.
One you have replaced the anti-limescale cassette, simultaneously press the reset
button in front of the water reservoir and the steam selection button until the light is
no longer on.
Cord clamp
After use you can easily store the cord and steam hose by
using the cord clamp. Pull out the clamp, lead the steam hose
and the cord around the steam generator and push in the
clamp to lock the cord and steam hose.
Automatic shut-off
The appliance will switch itself off when there has not been sprayed steam out of the
soleplate for longer than 10 minutes.
BEFORE THE FIRST USE
1.
Remove any stickers or protective foil from the ceramic soleplate.
2. Heat up the iron until the maximum temperature and iron on a damp cloth
during a couple of minutes to remove any possible residues from the soleplate.
Iron according to the instructions in the section «Steam ironing».
Caution:
•
During the first use it is normal that a specific odeur escapes from the appliance.
This odeur will disappear after a while.
•
Some particles may come out of the soleplate during the first use. This is
normal. The particles are harmless and will disappear after a while.
•
When turning on the appliance, the steam generator may produce a pumping
sound. This is normal. This sound indicates that water is pumped into the steam
generator.
•
While the soleplate is heating up, some steam will be released automatically.
This is also normal and will last for about 3 seconds.
USING THE STEAM GENERATOR
This steam generator offers 2 options: dry ironing or steam ironing. Follow the
instructions below. Also carefully read the ironing tips at the end of this section
before using the appliance.
Dry ironing
1.
Place the iron on the thermal insulation pads of the steam generator.
2. Plug in the appliance and press the on/off button.
46
Advertenties
Inhoudsopgave
