Download Inhoudsopgave Inhoud Print deze pagina

General Information; Other Symbols In This Documentation; Units Of Measurement; Safety - AEG DDLT PinControl 13 Handleiding Voor Bediening En Installatie

Hydraulisch gestuurde
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 40
OPERATION

1. General information

The chapters "Special Information" and "Operation" are
intended for both the user and qualified contractors.
The chapter "Installation" is intended for qualified con-
tractors.
Note
Read these instructions carefully before using the
appliance and retain them for future reference.
Pass on the instructions to a new user if required.
1.1
Safety instructions
1.1.1 Structure of safety instructions
KEYWORD Type of risk
!
Here, possible consequences are listed that may re-
sult from failure to observe the safety instructions.
» Steps to prevent the risk are listed.
1.1.2 Symbols, type of risk
Symbol
Type of risk
Injury
!
Electrocution
Burns
(burns, scalding)
1.1.3 Keywords
KEYWORD
Meaning
DANGER
Failure to observe this information will result in seri-
ous injury or death.
WARNING
Failure to observe this information may result in seri-
ous injury or death.
CAUTION
Failure to observe this information may result in
non-serious or minor injury.
Operation - for users and contractors

1.2 Other symbols in this documentation

Note
General information is identified by the symbol
shown on the left.
» Read these texts carefully.
Symbol
Meaning
Material losses
!
(appliance damage, consequential losses and envi-
ronmental pollution)
Appliance disposal
» This symbol indicates that you have to do something.
The action you need to take is described step by
step.

1.3 Units of measurement

Note
All measurements are given in mm unless stated
otherwise.

2. Safety

2.1 Intended use

This appliance is intended for domestic use. It can be
used safely by untrained persons. The appliance can also
be used in a non-domestic environment, e.g. in a small
business, as long as it is used in the same way.
This pressure appliance is designed to heat DHW. The
appliance can supply one or more draw-off points.
Any other use beyond that described shall be deemed
inappropriate. Observation of these instructions and of
instructions for any accessories used is also part of the
correct use of this appliance.

2.2 General safety instructions

CAUTION Burns
During operation, the tap can reach temperatures in
excess of 60 °C.
There is a risk of scalding at outlet temperatures in
excess of 43 °C.
WARNING Injury
!
The appliance may be used by children aged 8 and
up and persons with reduced physical, sensory or
mental capabilities or a lack of experience and know-
how, provided that they are supervised or they have
been instructed on how to use the appliance safely
and have understood the resulting risks. Children
must never play with the appliance. Children must
never clean the appliance or perform user mainte-
nance unless they are supervised.
Material losses
!
Protect the appliance and its tap against frost.
17

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Ddlt pincontrol 18Ddlt pincontrol 21Ddlt pincontrol 24

Inhoudsopgave