Maintenance
Always disconnect the plug from the power socket before commencing
any work on the machine.
Important: Always clean and oil the blades after prolonged use of
the hedge trimmer. This will greatly affect the life of the equipment.
Damaged cutting units must be properly repaired immediately. Clean
the shearing blades with a dry cloth or – in case of heavier dirt – with a
brush. Attention: Danger of injury! Oiling of the blades should ideally be
carried out using an environmentally friendly lubricant.
Sharpening of the blades
The blades generally do not need servicing and do not require
resharpening if used correctly. In order to prevent injuries caused by
the blades when not in use, the sharpened cutting blade should be
covered by the blade cover (Fig. B2). The blades cannot be sharpened
by the user without opening the equipment and the safety mechanism.
Resharpening of the blades can therefore only be carried out at a
specialist workshop.
Guarantee terms
Please carefully retain the guarantee card completed by the seller, or
the proof of purchase.
The company WOLF-Garten provides a guarantee for 24 months from the
date of purchase. This guarantee is in accordance with the relevant state of
technology and the utilisation purpose / area of application. The consumer's
statutory rights are not affected by the following guarantee guidelines.
Pre-conditions for the 24-month guarantee entitlement:
- Deployment of the device solely for private use.
The guarantee is reduced to 12 months in the commercial sector or
leasing business.
- Proper handling and observance of all information given in the operating
manual, which forms part of our guarantee terms.
- Observance of the prescribed maintenance intervals.
10 10
All manuals and user guides at all-guides.com
Storing the trimmer after use (Fig. B6)
The hedge shears must be stored such that there is no danger of
injuries being caused to persons by the cutting blades!
Important note: The shearing blades should be cleaned after each use.
This will considerably increase the service life of the device. Please use
a lubricator that is not harmful to the environment, e. g. our service spray.
Then put the shears in their case with the cutting blades first.
Repair service
Repairs to electric power tools should only be carried out by specialist
electrical personnne
l.
- No unauthorised alteration of the design.
- Installation of original WOLF replacement parts / accessories.
- Presentation of the completed guarantee card and/or proof of purchase.
This guarantee does not extend to normal wear-and-tear on blades, blade
mounting components or friction disks, V-belts/toothed belts, running wheels/
tyres, air filters, spark plugs and spark plug connectors. Any guarantee claim
shall be immediately void in the event of unauthorised repairs. Faults and
defects which can be traced to material or manufacturing faults will be rectified
exclusively by our contracted workshops (the seller has the right to remedy
a defect) in your vicinity, or by the manufacturer if the latter is closer. Any
claims going beyond the provision of a guarantee are ruled out. There is no
entitlement to a replacement. Any transport damage should be reported not to
us but to the shipper in question since, otherwise, any compensation claims
vis-à-vis the shipper would be voided.