PROBLEM
The compressor
works abnormally
with a Buzzing
Noise
Water shortage
indicator
light is on
Indicator lights on
display are not on
The Ice made is too
large
and with pieces
sticking
together.
All indicators twinkle
simultaneously
WARNING
If the power cord is damaged; it must be replaced by the manufacturer, its service agent or a
similarly qualified person in order to avoid a hazard.
Fill with potable water only.
It is normal for the compressor and condenser surface to reach temperatures between 70°C and
90°C during operation and surrounding areas may be very hot.
Due to fast freezing, ice cubes may appear "Cloudy". This is air trapped in the water and will not
affect quality or taste of ice.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities or lack of experience and knowledge unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Do not immerse in water
1) Warning –keep ventilation openings ,in the appliance enclosure or in the built-in structure clear
of obstruction.
2) Warning – do not use mechanical devices or other means to accelerate to defrosting
process ,other than those recommended by the manufacturer.
3) Warning – do not damage the refrigerant circuit.
4) Warning – do not use electrical appliance inside the food storage compartments of the
appliance ,unless they are of the type recommended by the manufacture.
POSSIBLE CAUSE
The voltage is lower than
recommended
1.There is no water
2.The pump is full of air
Blown fuse/ No power
1.water temperature is too low
2.Ice of previous cycles left in
the water tray
Water tray is blocked by ice
cube
SUGGESTED SOLUTIONS
Stop the Ice maker and do not restart
until the voltage is normal.
1.Add to some water until it reaches
MAX position
2.Press POWER button to restart
Replace fuse / Turn power on
1.Select small size
2.Take out the ice under the standby
state
Unplug the power to take out the ice
which blocking the tray, then plug the
power and press the POWER button,
the machine will restart 3mins later.