Inhoudsopgave
Advertenties
15 Operation and Handing
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
Warning
► Do not leave the device unsupervised when it is in operation, so that you can intervene
quickly in the event of dangers.
15.1 Key function
A. Display size of the ice cubes (S = small or L = large) B. Operation display (Power)
C. Ice display (ice basket filled up)
E. On/Off button
15.2 Operation
► Please wait min 24 hours before you switch on the ice maker. You will find that the
cooling liquid settles out in this time.
Open the cover of the ice maker and remove the ice basket.
Fill water into the water reservoir and keep water level below the water level mark.
Press the "Power" button to begin the ice making cycle.
Select the ice cube size by pressing the "Select" button. If the room temperature is
lower than 15°C, it is recommended to select small ice cube in order to avoid ice
sticking together.
Depending on selection of ice cube size and room temperature, the ice making cycle
lasts approx. 6 to 13 minutes.
If water pump can't inject water, the ice maker will stop automatically. The "Add Water"
indicator will be on. Press the "Power" button and fill in water. Then press the "Power"
button again. Allow the ice maker at least 3 minutes to settle before restarting.
Please note
D. Refill display for water
F. Button to chose size of ice cubes
32
Advertenties
Inhoudsopgave
