Inhoudsopgave
Advertenties
EN
Footswitch Battery
The wireless footswitch uses a 9-volt battery located under the battery cover on the bottom of the product, which can be
replaced when necessary.
Battery Replacement
To replace the battery in the wireless footswitch:
1. Turn the power switch to the Off position.
2. Remove the battery cover by removing 2 screws with a Phillips-head screwdriver.
3. Remove the old battery from the housing and unplug it from the leads.
4. Replace with a new 9-volt battery, ensuring that the positive (+) and negative (-) leads correspond to the correct
electrodes on the battery.
5. Place the battery into the housing and cover with the battery cover.
6. Secure the battery cover with the 2 Phillips-head screws.
Do NOT over-tighten the screws!
DMX Values
19Ch
Channel Function
1
Automatic Programs
2
Dimmer
Strobe
(when Ch. 1 is 000 009)
Program speed
3
(when Ch. 1 is 010 249)
Sound sensitivity
(when Ch. 1 is 250 255)
4
Red 1
5
Green 1
6
Blue 1
7
Amber 1
8
Red 2
9
Green 2
10
Blue 2
11
Amber 2
12
Red 3
13
Green 3
14
Blue 3
5
QUICK REFERENCE GUIDE
Value
Percent/Setting
000 009 No function
010 029 Auto program 1
030 049 Auto program 2
050 069 Auto program 3
070 089 Auto program 4
090 109 Auto program 5
110 129 Auto program 6
130 149 Auto program 7
150 169 Auto program 8
170 189 Auto program 9
190 209 Auto program 10
210 229 Auto program 11
230 249 Auto program 12
250 255 Sound-active program
000 255 0–100%
000 009 No function
010 255 Strobe, slow to fast
000 255 Program speed, slow to fast
000 010 Sound sensitivity off
011 255 Sound sensitivity, low to high
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 255 0–100%
4BAR Quad ILS QRG Rev. 1
Advertenties
Inhoudsopgave
