Inhoudsopgave
Advertenties
D-Fi USB Connectivity
The 4BAR Quad ILS is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from CHAUVET
DJ. Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into the USB port then set the product's DMX
Personality and DMX Address. Further instructions for connecting and configuring this product for D-Fi USB operation
are in the User Manual.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause
damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual display control/menu
buttons will be unavailable until you unplug the D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons
Wireless Footswitch Operation
LED indicators
1
The included wireless footswitch provides quick access to preset colors, color-change programs, and sound-activation
through the 4BAR Quad ILS microphone.
To use the footswitch:
1. Connect the 4BAR Quad ILS to power. Turn the wireless footswitch on.
2. Press <MENU> repeatedly until SEt shows on the display, and press <ENTER>.
3. Use <UP> or <DOWN> to select ir, and press <ENTER>.
4. Use <UP> or <DOWN> to select on, and press <ENTER>.
5. Press <MENU> repeatedly until P-- shows on the display, and press <ENTER>.
6. Press pedal #3 to activate static color controls. When working, all the lights will begin in a static color and FOOt
will appear on the Menu display.
7. Use the chart below to activate the desired function.
Pedal
1
Tap pedal to activate, then tap to
(Auto Programs)
2
(Sound Mode)
3
(Static Colors)
4
(Blackout)
The 4BAR Quad ILS footswitch will work properly in any mode, with a maximum unobstructed distance of
100 ft (30.5 m). You must turn on the ir setting from the 4BAR Quad ILS and navigate to Auto mode before
using the footswitch.
4BAR Quad ILS QRG Rev. 1
QUICK REFERENCE GUIDE
3
2
Action
navigate to desired function
Press and hold
Tap
Press and hold
Tap
Press and hold
Power switch
4
9-volt battery cover
Function
Auto programs 1–8
Sound-active programs
Static colors C1–18
Auto snap program
Auto fade program
Auto fade program
Blackout
Fade to blackout
EN
4
Advertenties
Inhoudsopgave
