Inhoudsopgave
Advertenties
WINDOW SEALING KIT
a
d
c
3.
Start by cleaning the adhesive surface on the window pane and window sash
thoroughly.
4.
Now, apply the included adhesive hook-and-loop tape to each outer edge of
the window sash. The hook-and-loop tape is self-adhesive. Therefore, only
pull off a small portion of the protective film at a time and apply the hook-
and-loop to the window sash.
5.
Next, apply the hook-and-loop tape to the window frame.
Stand 22.10.2024
Copyright UNOLD AG | www.unold.de
3. Next, plug the adapter (1) into the hose
connector on the appliance. Position the adapter
from the top before sliding it in completely until
the adapter securely locks into place. The release
tab must be pointing up.
4. Clamp the open end of the hose into the open
window. Make sure to seal the rest of the open
window in order to conserve energy. If the window
is fitted with an outer shutter, lower the shutter as
much as possible.
1.
The kit is suited for casement windows
and top-hung windows (top-hung roof windows
that can be hinged open all the way).
2.
The length of the sealing film is
b
approx. 390 cm. To calculate if this length
is sufficient for your window, you need to
measure all four sides of the window. If the
total length of the window sides a+b+c+d
is less than 390 cm, you can use the kit. If
the window circumference is greater, you will
need to use a different sealing option.
DE
EN
FR
NL
IT
ES
PL
39 von 152
Advertenties
Inhoudsopgave
