IMPORTANT SAFETY INSTRUCTIONS
Use the infra red heater for the objective for which it is made: to heat (the object in/on) a room
or terrace. Don't hang p.e. wet textile over the lamp to dry, but always notice the minimum
distances to the equipment.
When using electrical appliances, basic safety precautions should always be followed to reduce
the risk of fire, electric shock, or injury to persons etc. For this reason, read the safety
instructions, but also the assembly and operating instructions conscientiously before operating
the appliance.
Check (before use) if the voltage indicated on the appliance corresponds to the tension of the
electric point to which you want to connect it. The power supply should correspond to the
relevant regulations and the national instructions. Make sure that the voltage does not
fluctuate as this will shorten the life-expectancy of the lamp.
Extension cords and multi-sockets may be used only if care is exercised in their use. The
marked electric rating of the extension cord or multi-socket should have adequate current
carrying-capacity and their marked electric rating should correspond to that of the
appliance(s) you want to connect. If you use a cordreel, unwind the cord than totally!
Don't locate the appliance just above or below a wall socket.
Keep all flammable things as furniture, curtains, paper etc. away from the appliance (at least
1,25 meter). Persons must be at least 1.25 m from a working unit.
Despite of the fact that the GOLDSUN is very watertight, you have to be careful with water.
Make sure that the GOLDSUN cannot fall into water and don't expose it to heavy water
beams.
In order to avoid overheating and fire hazard, do not cover or obstruct the appliance. Do not
put any of the following materials on the appliance, such as clothes, blanket, pillow, paper
etc. The minimum distance 1,25 meter between the appliance and flammable materials must
always be maintained.
The casing and the front cover of the appliance become extremely hot during operation. So
do not touch the appliance during use: risk of scald injury! Pay attention that no combustible
materials (such as curtains, marquees, flags, plastic foil etc.) due to wind or other
environmental influences come to close to the appliance. That can cause singe damage or
fire. Pay attention that they don't cover or obstruct the appliance. That can cause damage or
fire!
Make sure that the cord not hangs over (sharp) edges, not makes strong curves, not can be
pulled along and not touches hot surfaces.
If the appliance, by whatever which reason, produces cracks or breaks, if you during the
operation establish imperfection or interruption, or if the aluminium casing, the front cover
surface or the cord or plug show flaws, discontinue the operation of the appliance and take
the plug from the socket.
If the appliance, the cord or the plug is damaged or shows imperfection, contact your
supplier, the manufacturer or a qualified service point. Do not try to repair the appliance by
yourself, to avoid a hazard. Repairs by unqualified persons or changing's to the appliance
break the water tightness of the equipment and let expire the guarantee and the liability of the
manufacturer.
Turn off the appliance, remove the plug from the power outlet and let the appliance cool
down before you touch-, install-, dislocate-, clean- or maintain it.
9