Inhoudsopgave
Advertenties
14 | English
Cordless Drill/Driver
– First gear
– Second gear
Max. torque, hard/soft screw-
driving application according to
ISO 5393
A)
Max. drilling diameter
– Steel
– Wood
Chuck capacity
Max. screw diameter
Weight according to
EPTA-Procedure 01:2014
B)
Recommended ambient tem-
perature during charging
Permitted ambient temperature
during operation
C)
and during
storage
Recommended rechargeable
batteries
Recommended chargers
D)
A) Measured at 20–25 °C with rechargeable battery PBA 18V 1.5Ah.
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
D) The following chargers are not compatible with the PBA rechargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
Noise/vibration information
Noise emission values determined according
to EN 62841-2-1.
Typically, the A-weighted sound pressure level of the power
tool is 71 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 62841-2-1:
Drilling into metal: a
< 2.5 m/s
2
, K = 1.5 m/s
h
Screwdriving: a
< 2.5 m/s
2
, K = 1.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
1 609 92A 897 | (16.08.2022)
PSR 1440 LI-2 PSR 1800 LI-2 PSR 1810 LI-2 PSR 1820 LI-2 PSR 180 LI-8
min
-1
0–400
min
-1
0–1350
0–1350
Nm
34/17
38.5/18.5
mm
10
mm
25
mm
1–10
mm
8
kg
1.2
°C
0 to +35
0 to +35
°C
–20 to +50
–20 to +50
PBA 14,4V...W-. PBA 18V...W-. PBA 18V...W-. PBA 18V...W-. PBA 18V...W-.
AL 18...
AL 18...
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u
2
,
2
Charging the Battery
u
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by the "Electronic Cell Protection (ECP)". When the battery
0–400
0–400
0–1350
38.5/18.5
38.5/18.5
10
10
30
30
1–10
1–10
8
8
1.5
1.5
0 to +35
–20 to +50
–20 to +50
AL 18...
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
0–400
0–400
0–1350
0–1350
38.5/18.5
10
10
30
30
1–10
1–10
8
8
1.5
1.5
0 to +35
0 to +35
–20 to +50
AL 18...
AL 18...
Bosch Power Tools
Advertenties
Inhoudsopgave
