Inhoudsopgave
Advertenties
FLOOR MOPPING CLEANING
Once the floor has been thoroughly vacuumed, you can swap the dust container for the
water tank included in the original packaging to continue the cleaning process. The
robot is equipped with a water tank with a drip stop control: the amount of water used to
moisten the mop can be electronically controlled with the remote control.
•
Open the airtight lid and pour water into the water tank
Note : Remove the water tank before charging the robot. Do
not use the mop outdoors. Remove carpets before using the
mop to prevent water damage.
•
Attach the mop to the underside of the water tank and
make sure it is properly attached
•
Remove the dust tank and introduce the water tank in
the robot.
Note : After cleaning the floor, empty the water tank, rinse it
thoroughly with clean water and store it in a dry place to
avoid unpleasant odours. Make sure the 4 water drainage
holes are not blocked. If necessary, unlock it with a small
needle.
•
It is possible to set different water flow levels for specific cleaning needs. Press the
water flow button
The waterflow
is closed.
on the remote to adjust the waterflow speed..
The waterflow
is small.
13
The waterflow
The waterflow
is medium.
is large.
VG RVC 3002
Advertenties
Inhoudsopgave
