Inhoudsopgave
Advertenties
Thank you for purchasing a Kinderkraft product. Our products have been designed for your child's safety and comfort. The
buggy is an ideal solution for those who value quality, modernity and functionality. Please read the manual carefully and
follow its recommendations.
IMPORTANT - READ CAREFULLY AND KEEP FOR FUTURE
REFERENCE.
A. Safety and care notes
WARNING!
• Never leave the child unattended.
• Ensure that all the locking devices are engaged before use.
• To avoid injury ensure that the child is kept away when
unfolding and folding this product.
• Do not let the child play with this product.
• Always use the restraint system.
• Check that the pram body or seat unit or car seat attachment
devices are correctly engaged before use.
• This product is not suitable for running or skating.
•
Age and weight usage: from 0 months up to 15 kg.
•
We recommend using lowest reclined position for newborn babies.
•
This product may only be used by one child at the same time
•
The parking device shall be engaged when placing and removing the children
•
The maximum basket load is 2 kg.
•
Maximum weight of a bag attached to the adjustable handle is 1 kg.
•
Any additional load suspended from the buggy handles, backrest and sides will cause stability loss.
•
Use only parts and accessories supplied or recommended by the manufacturer. Do not use other parts or accessories.
•
Lift the front suspension when going up a curb or step.
•
Do not place the product near open flame or other heat sources.
•
Do not use with an additional platform.
B. ASSEMBLY
I. BUGGY COMPONENTS (FIG. 1)
A. Frame with seat and safety straps
B. Front wheels
C. Rear wheels
D. Safety bar
II. UNFOLDING BUGGY FRAME Place the frame on a flat surface with its handle up (FIG. 2). Start unfolding the Baby stroller
by pressing the parents' handle against the Baby stroller frame so that all the elements are tightly connected (Fig. 2, A), then
press the button on the parents' handle (I) and press the big button (II) as shown in Fig. 2, B. Pull the baby stroller frame
upwards until it locks. Make sure that the buggy cover is properly attached to the Velcro fasteners on both sides of the
buggy (FIG. 3). NOTE! Make sure that the attachments on the inner side of the buggy material are inserted into the hooks,
and the press studs are closed (FIG. 16). A properly unfolded frame is shown in FIG. 4.
III. WHEEL ASSEMBLY/DISASSEMBLY Insert the rear wheels in the rear axles holes until you hear the locking sound (FIG. 5).
In order to remove the rear wheels (FIG. 6), unlock the locking button located on both sides of the rear axle (6A) while
pulling the wheels out of the slots (6B). Insert the front wheels in the front axles until you hear the locking sound (FIG. 7).
To remove the front wheels, push the quick release button located below the footrest under each wheel (FIG. 8). The buggy
has a system of swivel front wheels which can be locked in the straight-ahead position. To lock the wheel to move forward,
slide the ring located above the wheel (FIG 9).
Dear Customers,
E. Cup holder
F. Leg cover
G. Rain cover
18
Advertenties
Inhoudsopgave
