CONTROLS
The hood is fitted with a control panel with aspiration speed selection control and a light switch to control cooking area lights.
To select the functions of the hood just touch the commands.
Light key ON/OFF
Intensive speed selection key (suction power) - duration 5 minutes - press again to return to previous
setting.
High-speed selection key (suction power).
Medium-speed selection key (suction power) - when flashing it indicates the need to wash or replace the
(2)
carbon filter. This signal is normally deactivated. To activate the alarm, disabling controls, key 0 Press keys 1
and 2 at the same time to activate it. At first only key 1 will flash and then both keys 1 and 2 to indicate
activation. Repeat the operation to deactivate the signal. At first keys 1 and 2 will flash and then only key 1 to
indicate deactivation.
(1)
Low-speed selection key (suction power) – when flashing it indicates the need to wash the grease filter.
Motor OFF Key - stand by - reset wash/replace filters signal - disables selection keys
MOTOR OFF
(0)
Press briefly to switch the motor off.
RESET FILTERS SIGNALS
After having carried out maintenance of the filters, press the key for 3 seconds. Flashing led 1 (fats filter) or 2
(carbon filter) will stop flashing.
DISABLING CONTROLS
Pressing the key for 3 seconds the speed selection keys will be disabled.
This function can be useful during the product cleaning operations to avoid operating the hood accidentally.
Press again for 3 seconds to enable again.
If the hood fails to operate correctly, briefly disconnect it from the mains power supply for almost 5 sec. by pulling out the plug. Then
plug it in again and try once more before contacting the Technical Assistance Service.
20