Inhoudsopgave
Advertenties
TELE System
TV description
On the rear side of TV, the available I/O connections are:
1.
Slot Common Interface (CI / CI+ plus)
2.
YPbPr / Audio inputs (mini)
3.
Earphone output (jack 3,5 mm)
4.
USB port (Mediaplayer function)
5.
SCART
6.
HDMI input
7.
SATELLITE RF Antenna (Tipo F)
8.
TERRESTRIAL RF Antenna (IEC)
9.
Coaxial digital audio output (COAXIAL)
10. Power supply 12V DC
Connections
Antenna Connection
In order to watch live TV programs, connect the TV to an terrestrial and/or satellite antenna.
In both cases, connect the antenna cable (75 Ω) to RF inputs on the rear of TV set.
External device connection
Via RCA: be sure that both TV and external device are off. Use RCA/SCART adaptor to
connect the external device via SCART to the AV input of TV set. Turn on the devices, press
SOURCE à AV.
Via HDMI: be sure that both TV and external device are off. Connect the cable from source
to TV set and turn on the devices; Turn on the devices, press SOURCE à HDMI.
Batteries insertion
You have to replace or install the batteries when:
•
You buy the product.
•
the remote control does not work properly.
Once you open the battery door located on the back of the remote, insert the 2 batteries
(AAA) in the compartment, making sure to respect the correct polarity as indicated.
Remove the used batteries, which must be disposed of separately from household waste
taking them to any store or collection point and then repeat the operations for insertion.
To avoid damaging the remote control with the leakage of corrosive liquid, you should
remove the batteries if you plan not to use the device for a long period of time. Avoid using
different types of batteries or dead and new batteries at the same time.
Main menu description
Press the MENU key to bring up the main menu and use the arrow keys ▲ / ▼ and t / u
to navigate through the titles of menu. Press the MENU button to return to the previous
menu or EXIT to exit. The menus are: Channels, Images, Sound, Time, Security, Settings.
First Installation
At the first installation, select the OSD language and the country, enter the PIN (4 digits)
and confirm it to proceed. Select the signa type (DVB-T2 or Satellite) to launch the channel
scanning and press OK.
Advertenties
Inhoudsopgave
