Inhoudsopgave
Advertenties
- Check regularly, but most definitely before every use, the mains cable and mains plug
for damage. If any damage is visible, then further use of the unit must not be made.
- Routine maintenance must be carried out once a year, earlier if it is very dirty.
- During regular maintenance, check the impeller for visible damage and cracks. If there
is damage, the impeller must be replaced with a new impeller. Never operate the fan
with a damaged impeller!
- Clean the surface of the housing and the guard with a dry cleaning cloth and a damp
brush. Do not use petrol or a similarly flammable cleaning agent.
- In case of necessary repairs, contact an authorized service center.
- After cleaning, the fan must be completely reassembled
Behavior in case of an emergency: In the event of visible damage, unusual noises,
strong vibrations and/or malfunction, switch off the unit immediately, unplug the power
cord and secure it against being switched on again. The fan must not be put back into
operation until a qualified electrician has eliminated the cause of the fault and released
it for reuse.
- In case of necessary repairs, contact an authorised service centre.
Storage
- If you are not going to use the fan for a long time, keep it in a dry room.
- You can also cover your unit to protect it from dust or dirt deposits.
Disposal
Important: Environmental damage due to improper disposal!
- Do not dispose the appliance or used batteries with the regular household waste!
- Dispose of packaging material, decommissioned appliances and used batteries in
accordance with the current regulations in your country. Please refer to the information
on page 62.
Help with faults
Fault
Fan does not start
If the fault can not be remedied using the above listed remedies, then the plug has to
be removed from the socket. A specialist must now establish the cause and carry out
the repair work accordingly. If the mains cable to this unit is damaged, then it can only
be repaired by a repair workshop named by the manufacturer, due a special tool being
needed.
Note: Opening the unit and repairs may only be carried out by a specialist!
Cause
Speed setting to „0".
Mains plug not correctly
inserted.
Household fuse blown/trip
defective.
Fuse has blown due to
overload (motor overhe-
ating).
Remedy
Switch on unit.
Insert mains plug.
Check household fuse/trip.
Remove unit from mains supply.
Pull plug from the socket and have
the unit repaired by a specialist or
customer service.
GB
9
Advertenties
Inhoudsopgave
