Inhoudsopgave
Advertenties
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
You must always keep a safety distance of 10 cm to any object, item or wall.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.
5.3 Operation
•
Before first use, fill the water tray up to ¾ with water and attach the glass cylinder
with the round wire mesh.
•
Connect the device to a grounded socket.
•
Turn on the device with the use of the ON/OFF switch.
•
The red power control lamp flashes up.
•
Shortly heat the water at highest level, then pull the power plug from the socket and
pour out the water.
•
After the device has cooled off, fill water tray with water once more and start up the
device according to the following instructions.
•
Fill the water tray up to ¾ with water and attach the glass cylinder with the round wire
mesh.
•
Attach the grid to the round wire mesh in the glass cylinder.
•
Place the sausages in the glass cylinder.
•
Set the lid on top of the glass cylinder.
•
Set the temperature control to highest power level in order to heat up the water. The
green control lamp flashes up.
•
Shortly afterwards, turn back the temperature control and adjust the desired
temperature. The heating control lamp goes out as soon as the set temperature has
been reached.
•
When turning back the temperature control too late, the residual heat of the heating
plate might result in a longer cooking time of water.
ATTENTION!
Regularly check the water level. You must not use the device without water at any
time!
•
At a lower temperature the heat of sausages can be kept.
- 23 -
Advertenties
Hoofdstukken
Inhoudsopgave
