Inhoudsopgave
Advertenties
UK
7.
Storage
If the unit will not be used for an extended period, do the following:
1. Unplug the unit.
2. Clean the air filter with a vacuum cleaner.
3. Make sure the device is in perfect condition so that it is safe to use again after a long
storage period.
4. Store the unit in appropriate packaging.
5. Store the unit in a dust-free place and out of direct sunlight. It is recommended to
cover it with a piece of plastic.
8.
Display Error Codes
Please contact your local distributor if any of the error codes below appears.
No.
1
2
3
5
96
Display
Error
code
Temperature
E1
sensor error
Humidity
E2
sensor error
Air inlet
temperature
L3
is too high
≥42ºC
Air inlet
temperature
L4
is too
low ≤0ºC
MV-2506-09-2024 . eeese-aircare.com © All rights reserved by eeese air care ApS
Display
Flashs every
30 seconds
Flashs every
Dehumidifier works normally, but can't
30 seconds
Compressor stops working, fan works
Slow flash L3
If the dehumidifier temperature decreas-
es below 40ºC, the dehumidifier will
Compressor stops working, fan works
Slow flash L4
If the dehumidifier temperature increas-
es above 2ºC, the dehumidifier will start
Observation
Dehumidifier works normally.
set the humidity.
at low fan speed.
start working normally.
at low fan speed.
working normally.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
