Advertenties
Connecting the switching power pack to the pump
NOTE
The pump will be destroyed, if water enters the plug connectors.
Never undo the union nuts on the plug connectors.
• The stud on the plug connector of the pump must engage with the plug connector of the
switching power pack.
Do not plug the power plug into the socket yet!
Once the plug connectors of the filter pump and switching power pack have been inserted and
have engaged, they can only be disconnected by means of a screw driver. (→ Connecting the
switching power pack to the pump)
Commissioning/start-up
NOTE
Never connect the pump to a dimmer. Otherwise the pump will be destroyed.
NOTE
Prevent the pump from running dry. Otherwise the pump will be destroyed.
Only operate the pump when it is submerged or flooded.
A brand-new pump will only reach its maximum capacity after several hours of operation.
Switching ON/OFF
• Switching on: Plug the power plug into the outlet.
– The unit switches on immediately.
• Switching off: Pull the power plug from the outlet.
AMX0077
EN
AMX0077
29
Advertenties
