Advertenties
▶
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or
temperature above 130° C (265 °F) may cause explosion.
▶
Follow all charging instructions and do not charge the battery pack or tool outside the
temperature range specified in the instructions. Charging improperly or at temperatures outside
the specified range may damage the battery and increase the risk of fire.
Service
▶
Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
▶
Never service damaged battery packs. Service of battery packs should only be performed by
the manufacturer or authorized service providers.
Safety warnings for screwdrivers and impact wrenches
▶
Hold the power tool by insulated gripping surfaces, when performing an operation where the
fastener may contact hidden wiring. Fasteners contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the operator an electric shock.
Additional safety instructions
▶
Use the product and accessories only when they are in perfect working order.
▶
Never tamper with or modify the product or accessories in any way.
▶
Before beginning work, check the working area for concealed electric cables or gas and water
pipes. External metal parts of the product could give you an electric shock or cause an explosion
if you accidentally damage an electric cable or a gas or water pipe.
▶
Always hold the product with your hand firmly on the grip provided. Keep the grip dry and clean.
▶
Keep the air vents clear at all times. Risk of burn injuries due to blocked air vents!
▶
Avoid touching rotating parts – risk of injury!
▶
Wear eye protection, a hard hat and ear protection while the product is in use.
▶
Wear protective gloves when changing the accessory tool. Touching the accessory tool can result
in cuts and burns.
▶
Wear eye protection. Flying fragments present a risk of injury to the body and eyes.
▶
Dust produced by grinding, sanding, cutting and drilling can contain dangerous chemicals. Some
examples are: lead or lead-based paints; brick, concrete and other masonry products, natural
stone and other products containing silicates; certain types of wood, such as oak, beech and
chemically treated wood; asbestos or materials that contain asbestos. Determine the exposure of
the operator and bystanders by means of the hazard classification of the materials to be worked.
Implement the necessary measures to restrict exposure to a safe level, for example by the use of a
dust collection system or by the wearing of suitable respiratory protection. The general measures
for reducing exposure include:
▶
working in an area that is well ventilated,
▶
avoidance of prolonged contact with dust,
▶
directing dust away from the face and body,
▶
wearing protective clothing and washing exposed areas of the skin with water and soap.
▶
Take frequent breaks and do physical exercises to improve the blood circulation in your fingers.
High vibration during long periods of work can lead to disorders of the blood vessels and nervous
system in the fingers, hands and wrists.
▶
Do not look directly into the light source (LED) of the product and do not aim the beam at other
persons' faces. Risk of dazzling or eye damage.
▶
Switch the product on only after you have brought it to the working position.
▶
Wait until the product has come to a complete stop before you lay it down.
▶
Risk of injury by falling tools and/or accessories. Before starting work, check that the battery and
installed accessories are secure.
17
2368300
*2368300*
Advertenties
