ca. 30 cm
ca. 90,5 cm
Fig. 4 – Minimum room height, aligning the appliance
Ensure that the appliance is level, compensate for any
unevenness in the floor by screwing in the adjustable
feet (3) (see Fig. 4).
Level the refrigerator with a spirit level.
If necessary, tighten the two screws on the handle us-
ing an Allen key.
6.2. Removing and replacing the
vegetable drawer/glass shelf
To remove or insert the vegetable drawer (4) or a glass
shelf (5/8), open the door fully.
Removal
Pull out the vegetable drawer (4) with both hands and
remove the vegetable drawer from the refrigerator
compartment at a slight angle.
Lift the shelf (5/8) with both hands and pull the shelf
out of the refrigerator compartment at a slight angle.
Fitting
To reinsert the glass shelf, slide it at a slight angle from
the front into the from the front into the recesses in the
refrigerator compartment wall.
To reinsert a vegetable drawer, slide the vegetable
drawer into the appliance at a slight angle.
7.
Operating the appliance
For more detailed information about your product, please
refer to the user manual.
Observe all the instructions in the user manual under
Storing food in the refrigerator!
Connect the appliance to an earthed mains socket. The
local mains voltage must correspond to the technical
specifications for the appliance.
The temperature control (9) setting automatically adjusts
the temperature in the refrigerator compartment (7).
The refrigeration temperature can be set as follows:
0
The appliance is
switched off
1
2
The maximum refrig-
to
erator temperature
(the warmest)
3
4
Intermediate posi-
to
tion
5
The lowest refriger-
ator compartment
temperature (cold-
est)
Fluctuating ambient temperatures can cause the energy
consumption and temperature inside the refrigerator to
rise.
Before loading fresh food, set the temperature control
5
(9) to position
position. After 2–3 hours, set to the
middle position. Check the temperature in the refriger-
ator compartment with a thermometer. The ideal tem-
perature is 6 °C on the lower shelf in the refrigerator
compartment. Once this temperature is reached, you
can load it with food.
The internal temperatures can be influenced by factors
such as the installation location, ambient temperature and
the number of times the door is opened. Take these fac-
tors into account when setting the temperature control.
7.1. Switching off the appliance
To de-energise the appliance, set the temperature
0
control (9) to
and unplug the mains plug from the
socket.
Wait approx. 10 minutes before switching on the appli-
ance again.
Use in cold ambient
temperatures
Use at normal ambi-
ent temperatures
Use in warm ambient
temperatures
51
DE
FR
NL
ES
IT
EN