Inhoudsopgave
Advertenties
Handling and operation
Switching the headphones on/off
♦
Press the
hear a beep and the operating LED
the operating LED
now in pairing mode.
♦
To switch off the headphones, press the
until you hear a beep and the operating LED
Wearing the headphones
♦
When putting the headphones on, please note the markings "R" (right) and "L" (left)
on the inside of the adjustable headband
♦
Adjust the headband
cover your ears.
Pairing/unpairing the headphones with a Bluetooth
Before you can use the headphones with the Bluetooth
compatible Bluetooth
♦
Switch on the headphones as described above to activate pairing mode.
Set the Bluetooth
♦
detailed description of how to do this can be found in the operating manual for your
Bluetooth
Select the entry SKHO 50 B2 from the list of devices found on your Bluetooth
♦
playback device and, if required, enter the code 0000 to connect the two devices.
If the pairing is successful, you will hear a rising series of beeps and the operating
7
LED
flashes blue twice at 3-second intervals.
To terminate the Bluetooth
♦
on the Bluetooth
6
for about 2 seconds until the operating LED
nately. The headphones are now in pairing mode again.
♦
Alternatively, switch the headphones off as described above to deactivate the
Bluetooth
SKHO 50 B2
4
button
for about 2 seconds to switch on the headphones. You will
7
then flashes alternately orange and blue. The headphones are
1
so that it fits your head comfortably and the earpieces
®
device.
playback device so that it scans for Bluetooth
®
®
playback device.
connection, either disable the Bluetooth
®
playback device or hold down the Bluetooth
®
®
function.
7
lights up violet for approx. 2 seconds. The
4
button
7
goes out.
1
.
®
function, you must pair them with a
7
flashes orange and blue alter-
again for about 2 seconds
®
device
®
devices. A
®
function
®
pairing button
GB │ IE
2
®
│
9
■
Advertenties
Hoofdstukken
Inhoudsopgave
