Inhoudsopgave
Advertenties
You can connect the system to your whole hi-fi system by connecting the line out socket to the
auxiliary input socket with a RCA cable (not included).
Press the "FUNCTION" button repeatedly or press the "PHONO" button to select Phono. "PHO"
will be displayed
Remove the stylus protector.
-
Be sure that the tone arm is being
-
detached from the tone arm rest before
operating and re-secured again
afterwards.
1. Set the speed selector to the proper position depending on the record to be played.
2. Place the record on the platter (use the spindle adaptor if required).
3. Set the Tone arm lever to the up position.
4. Lift the tone arm from the rest and slowly move it to the record side. The platter will start to
rotate and position the tone arm over the desired position of the record.
5. Pull down the Tone arm lever. The tone arm will come slowly on the recorder and start
playback.
6. At the end of record, the tone arm will return to the rest position automatically.
7. To stop manually, lift the tone arm from the record and return it to the rest.
PLAY SUSPENSION
Set the cueing lever to the up position will life up the tone arm and then stop playback temporarily
Remark:
-
Due to the auto return system was mechanical design and reset point will be affected
after transportation. Thus, the tone arm will return to the rest automatically when first
time place it to the platter and it was not the malfunction
-
Due to the length of the record is various, if you find the tone arm cannot return
automatically after playback of record. Please return the tone arm back to the rest
position manually or adjust the auto return point as below procedure.
-
Important:
To make sure the turntable can play the record with different standard completely, a hole with
"NO OPEN" PVC plate located at the back of the unit (33) to adjust the screw inside the turntable.
When the turntable stop early and the auto-return, pls use a screw driver to turn the screw inside
the hole about 45 degree in clockwise direction, if the record still cannot be played completely,
stop play and re-turn the screw 45 degree in clockwise direction again, till the turntable can be
play the record completely and auto return.
When the turntable cannot be stop and auto return but keep running after playing the record
completely, pls use a screw driver to turn the screw inside the hole about 45 degrees in counter-
clockwise direction, if the record still cannot be played completely, stop play and re-turn the screw
45 degree in counter-clockwise direction again, till the turntable can be play the record completely
and auto return.
LINE OUT
PHONO
5
NR560 / English Instruction Manual
Cartridge
Stylus assembly
Advertenties
Inhoudsopgave
