Inhoudsopgave
Advertenties
3. Screw on each handle in alignment with the handlebar axis. Do not tighten or apply
EN
force if the handle is crooked. It should be possible to tighten the handle without
applying force.
4. Ensure you have properly tightened the handle once it reaches the stop.
3.3. FOLDING/UNFOLDING THE DEVICE
The device can be folded and unfolded easily thanks to the folding/unfolding lever
(8). You should always perform this operation with care in order to avoid getting
pinched or jammed.
Folding
1. Place the device in front of you in a horizontal position.
2. Unlock the device by pulling the lever (1). upwards, then lowering the lever (2). as
indicated in the diagram above.
3. Lower the device's frame by 90 degrees until you hear a locking click.
Unfolding
1. Place the device in front of you in a horizontal position.
2. Start unfolding the product by pulling the lever (1). as indicated in the diagram
above.
3. Lift the device's frame by about 90 degrees until you hear a locking click.
4. Then lower the lever (2). as indicated in the diagram above.
14
Advertenties
Hoofdstukken
Inhoudsopgave
