Download Inhoudsopgave Inhoud
Deel
Print deze pagina
  1. Handleidingen
  2. Merken
  3. Chauvet Professional Handleidingen
  4. Verlichtingsapparatuur
  5. OVATION REVE E-3
  6. Beknopte handleiding

Replacing The Fuse; Dmx Connection - Chauvet Professional Ovation Reve E-3 Beknopte Handleiding

Verberg thumbnails Zie ook voor Ovation Reve E-3:
Inhoudsopgave

Advertenties

AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
Power Linking
It is possible to link up to 3 Ovation Rêve E-3 products at 100 V, 4 products at 120 V, 7 products at 208 V, 8 products at
230 V, or 8 products at 240 V. Never exceed this number. Power-linking cords can be purchased separately.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.

Replacing the Fuse

1.
Disconnect this product from power.
2.
Using a Phillips-head screwdriver, unscrew the fuse holder cap from the housing.
3.
Remove blown fuse and replace with a good fuse of the same type and rating.
4.
Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The Ovation Rêve E-3 will work with a DMX controller using a 3- and 5-pin DMX serial connection. A DMX Primer is
available from www.chauvetprofessional.com.

DMX Connection

The Ovation Rêve E-3 uses a 3- and 5-pin DMX data connection for its DMX personalities: 1Ch, 5Ch, 6Ch, 8Ch, 12Ch,
14Ch1, 14Ch2, 18Ch, and HSV. See the User Manual for information about connecting and configuring the product for
DMX operation.
Master/Slave Connection
The Ovation Rêve E-3 uses the DMX data connection for its master/slave mode. See the User Manual for information
about how to connect and configure the product for master/slave operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check with the manufacturer or the DMX controller's User Manual, as not all DMX controllers
have this capability. The Ovation Rêve E-3 supports RDM protocol that allows feedback to make changes to menu map
options. Download the User Manual from
Ovation Rêve E-3 QRG Rev. 7
QUICK REFERENCE GUIDE
Wire (U.S.)
Black
White
Green/Yellow
www.chauvetprofessional.com
Wire (Europe)
Brown
Blue
Green/Yellow
for more details.
EN
Screw Color
Yellow/Brass
Silver
Green
2

Advertenties

Inhoudsopgave
loading

Gerelateerde Handleidingen voor Chauvet Professional Ovation Reve E-3

Gerelateerde Producten voor Chauvet Professional Ovation Reve E-3

Deze handleiding is ook geschikt voor:

Ovationrevee3

Inhoudsopgave