Inhoudsopgave
Advertenties
Tests
The machine must be inspected by an expert every 12 months, in line with the "Regulations for fluid spraying equip-
ment", to ensure that continued safe operation is possible. The results of the inspection must be documented. No spe-
cific format is required for the documentation.
Accident prevention
The machine is designed to avoid accidents if used as intended. The operator must be informed of the danger of injury
due to hot machine parts and the high pressure jet. Observe the "Regulations for fluid spraying devices".
Oil change
Before starting up, always check the oil level at the sight glass. (Make sure the appliance is in a horizontal position!)
The oil level should be in the middle of the oil sight glass. In case of high humidity levels and temperature fluctuations,
some condensate may form; you must change the oil in this case (grey colour).
First oil change after approx. 50 hours of operation. Following this, no oil change is required for the appliance's service
life. If you need to change the oil to perform repairs, or because the oil colour is grey, open the oil drain screw above a
catchment tray and drain the appliance. Use a catchment tray to catch the oil, and dispose of the oil in line with legal
requirements. New oil: 0.25 l - engine oil W 15/40.
Oil leaks
If oil escapes, immediately contact your local customer service (dealer). (Environmental damage, transmission damage)
Warranty
A legal warranty period of twelve months from the date of purchase/date of invoice applies to our tools for commercial customers.
Claims
If you wish to claim under our warranty or guarantee, please return the complete machine and your invoice to our logistics centre in
Berka, postage paid, or send it to one of our authorised service centres. We request that you contact us beforehand by calling our free
STORCH service hotline on 0800 7 86 72 47.
Warranty entitlement
Claims can only be accepted for material defects or manufacturing errors, and only assuming proper use of the appliance. Wear parts
are not covered by warranty claims. All claims shall become void in the event of installation of third party components, improper hand-
ling and storage, as well as in the event of obvious disregard of the operating instructions.
Performing repairs
All repairs must be conducted on our premises or by an authorised STORCH service centre.
Disposal
End-of-life devices must not be disposed of as domestic waste. Please take them to a suitable collection point or hand over the end-of-
life device to your specialist dealer.
Translation of the original instruction
60
Advertenties
Hoofdstukken
Inhoudsopgave
