Inhoudsopgave
Advertenties
5.2
Setting the speed
▶ Turn the speed adjustment thumbwheel to set the power tool to the desired speed.
You can also change the speed while the power tool is in operation.
5.3
Using a dust extractor
Always use a dust extractor when you are working with the power tool. The dust extractor consists of
dust box and dust bag. Optionally, you can use a vacuum cleaner.
1. Connect the dust box to the dust removal connector.
2. Insert the dust bag.
5.4
Using a vacuum cleaner
▶ Connect the vacuum cleaner to the dust removal connector.
5.5
Recommended grip positions
5.5.1
Stock removal work
1. Pull the auxiliary grip out of its parked position to the working position.
2. Use both hands to guide the power tool, keeping one hand on the grip and the other on the integral
auxiliary grip.
You can also use the guide grip instead of the integral auxiliary grip.
5.5.2
Quality work
6
▶ Guide the power tool with one hand on the quality grip.
▶ That permits one-handed guidance close to the surface you are working on.
5.5.3
Working in the vertical plane
▶ Guide the power tool with one hand on the quality grip.
5.6
Sanding
1. Set the desired speed.
2. Position the power tool with the whole of its sanding face on the workpiece.
3. Switch on the power tool.
4. Applying moderate pressure, move the power tool steadily over the workpiece.
6
Care and maintenance
WARNING
Electric shock hazard! Attempting care and maintenance with the supply cord connected to a power outlet
can lead to severe injury and burns.
▶ Always unplug the supply cord before carrying out care and maintenance tasks.
Care
•
Carefully remove stubborn dirt from the tool.
•
Clean the air vents carefully with a dry brush.
•
Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
they can attack the plastic parts.
*326041*
2
3
4
5
7
326041
English
15
Advertenties
Inhoudsopgave
