Inhoudsopgave
Advertenties
Electrical safety
▶ Check the machine's supply cord at regular intervals and have it replaced by a qualified specialist if
found to be damaged. If the machine's supply cord is damaged it must be replaced with a specially
prepared and approved supply cord available from Hilti Customer Service. Check extension cords
at regular intervals and replace them if found to be damaged. Do not touch the supply cord or
extension cord if it is damaged while working. Disconnect the supply cord plug from the power
outlet. Damaged supply cords or extension cords present a risk of electric shock.
▶ Switch the electric tool off and unplug the supply cord in the event of an interruption in the electric
supply in order to avoid inadvertent restarting when the power returns.
▶ Have dirtied or dusty power tools that are used frequently for working on conductive materials
checked at regular intervals by a Hilti Service Center. Dust, especially dust from conductive materials,
or dampness on the surface of the power tool can, under unfavorable conditions, lead to electric shock.
Power tool use and care
▶ Secure the workpiece. A workpiece clamped in a vice or secured by some other clamping devices
is more secure than when held only by hand.
▶ Wear protective gloves when changing accessory tools as they get hot during use.
3
Description
3.1
Product overview
3.2
Intended use
The product is a hand-held, electrically powered random orbital sander. It is suitable for dry-sanding wood,
wood-based materials, composites, varnishes, paints, plastics, plaster and filler compounds with wearing,
replaceable sanding pads.
3.3
Possible misuse
•
This product is not suitable for working on hazardous materials.
•
This product is not suitable for working in a damp environment.
•
Do not use the product for wet grinding.
3.4
Items supplied
Random orbital sander with dust box, dust bag, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group.
4
Technical data
For rated voltage, rated current, frequency and/or input power, refer to the country-specific type
identification plate.
*326041*
1
326041
Guide grip
@
Speed adjustment thumbwheel
;
On/off switch
=
Grip
%
Dust bag
&
Dust box
(
Position of type identification plate
)
Quality grip
+
Backing pad
§
Sanding disc with velcro fastener
/
Brake ring
:
Auxiliary grip
∙
English
13
Advertenties
Inhoudsopgave
